Products


Click on logo to see product sizes

High Performance Additive for Engine Oil, Hydraulic Oil, Synthetic Oil, Gear Oil, Compressor Oil and Auto Transmission Fluid

SIZES AVAILABLE

  • 1 Litre Bottle will treat 40 litres of motor oil
  • 4 Litre Jug will treat 160 litres of motor oil
  • 10 Litre Jug will treat 400 litres of motor oil
  • 20 Litre Pail will treat 800 litres of motor oil
  • 205 Litre Drum will treat 8200 litres of motor oil
PRODUCT FEATURES
  • Reduces engine friction and amplifies power
  • Increases compression
  • Reduces wear
  • Reduced heat,noise,and vibration
  • Enhances oil colour and stability
  • Increases TBN value
  • Minimizes cold start wear
  • Extends life of additive package
  • Improved fuel economy
  • Reduces down time
  • Reduces friction in gearboxes and differentials
  • Reduces heat, wear, and energy consumption of hydraulic systems
  • Protects surfaces up to 600 degrees F
  • Strengthens acid-neutralizing capability of oil
  • Fortifies antioxidant property of oil
  • Removes sludge and varnish from engine parts
  • Increases water/antifreeze tolerance of oil
  • Withstands frictional contact up to 100,000 psi
  • Significantly reduces injector failure issues resulting from "STICTION"

HOW IT WORKS
Rycon 1™ “OIL FORTIFIER”
The Oil Fortifier increases the film strength of oils, resulting in less friction and wear, increasing horsepower, compression and improving fuel economy. It will withstand frictional contact up to 100,000 P.S.I. as well as maintain cleaner and improved oil between drain intervals. Most modern day oils WILL NOT withstand more than 50,000 P.S.I.

The American Petroleum Institute reports that “in modern engines the valve train with it’s cams, valve lifters, push rods, valve stem tips and parts of the rocker arms operate under conditions of extreme pressure because they carry heavy loads on very small contact areas. Unit loading which may be as high as 20,000 pounds per square inch is many times greater than the loads on the connecting rod bearings or on the piston rings”. (API PUBL. 1551 SEVENTH EDITION)

OTHER BENEFITS

  • Strengthens Acid-Neutralizing capability of oil
  • Removes sludge and varnish from engine parts
  • Fortifies Anti-Oxidant property of oil
  • Maintains higher T.B.N. value in oil
  • Minimizes cold start wear
  • Enhances oil colour stability
  • Protects surfaces up to 600 o F

RYCON-1 will not drain down like most oils. RYCON-1 will leave a film of lubricant wherever your oils have flowed. Excellent for reducing everyday dry start ups and protecting all surfaces when your equipment has been stored.

RYCON-1 will not change the viscosity of your oils and will not change tolerances of metal parts and passages for oils to flow.


TRIJET™ FUEL TREATMENT

The Fuel Treatment is a lubricant for to-days dry diesel and gasoline fuels. It lubricates the fuel pump, injectors and is also a fireside lubricant furnishing lubrication for the top end ring/cylinder inter-face in firing zone. Promotes a more complete combustion (cleaner burn) while improving compression, horsepower, fuel economy and also reduces engine soot deposits and emissions.

For best results RyconTM 1 Oil Fortifier and Trijet™ Fuel Treatment were formulated to work together.

Rycon-1© SDS HERE Download Printable PDF Version

You will need Acrobat Reader to view PDF. If you do not have Acrobat Reader. You can get it here.

For more information or a brochure please click here to contact Day Distributing.
----- back to top -----


Click on logo to see product sizes

High Performance Fuel Additive for Diesel and Gasoline Engines.

  • Top end Lubricant
  • Fuel System Lubricant
  • Fuel Injector Corrosion Inhibitor
SIZES AVAILABLE

  • 1 Litre Bottle will treat 1920 litres of fuel
  • 4 Litre Jug will treat 7680 litres of fuel
  • 10 Litre Jug will treat 19200 litres of fuel
  • 20 Litre Pail will treat 38400 litres of fuel
  • 205 Litre Drum will treat 393600 litres of fuel
PRODUCT FEATURES
  • Provides lubrication for valves in direct injection engines
  • Improved Top End lubrication for both diesel and gasoline engines
  • Reduces exhaust valve wear caused by "dry fuel" fatigue
  • Lubricates fuel pump
  • Lubricates ring/cylinder interface in firing zone
  • Eliminates uncontrolled wear in the fireside hot spots
  • Blends with alcohol based fuels
  • Reduces down time
  • Promotes more complete combustion
  • Improves engine compression
  • Increases horsepower
  • Increases fuel mileage
  • Reduces emissions
  • Provides smoother and improved acceleration
  • Reduces engine deposits

ADDITIONAL FEATURES FOR DIESEL ENGINES
  • Enhances fuel injector performance
  • Eliminates premature wear of fuel injectors
  • Retards oxidation and corrosion
  • Prevents filter plugging
  • Provides cleaner injector operation
HOW IT WORKS
As fuels (Gasoline & Diesel) become dryer due to the reduction of high boiling fractions, it is recommended that a fuel additive be used to improve perfromance in a "DRY BURN" situation

Trijet provides lubrication for the fuel pump and injectors. It improves top end lubricant in the ring/cylinder inter-face firing zone. It releases lubricant when burning in the fire zone and promotes a cleaner burn

Trijet further improves your engine oils additive package by improving the rust and foam prevention, detergency, as well as the acid neutralizing anti-oxidant properties of the oil.

Note: Using Pathfinder's Trijet as directed will eliminate the necessity for an engine flush.

Trijet© SDS HERE Download Printable PDF Version

You will need Acrobat Reader to view PDF. If you do not have Acrobat Reader. You can get it here.

For more information or a brochure please click here to contact Day Distributing.
----- back to top -----


Click on logo to see product sizes

High Load /Anti Wear Industrial Grease

SIZES AVAILABLE

  • 1 Tube contains 425 grams or 15 ounces
  • 10 Tubes per Carton
  • 60 Tubes per Case
  • 17 KG per Pail
  • 55 KG per Small Drum
  • 180 KG per Large Drum
PRODUCT FEATURES
  • Reduces friction and wear
  • Resists a wide variety of contaminants
  • Reduces heat, noise, and vibration
  • Suitable for temperatures up to 450° F
  • Dropping point at 605° F
  • Provides lubrication under boundary conditions
  • Withstands loads of 200,000 psi
  • Extended service intervals under heavy load conditions
  • Meets NLGI GC-LB specifications
  • Multi purpose wide range of use
  • Non corrosive to yellow materials
  • Excellent rust protection
  • Reduces down time
  • Excellent water resistance
  • Non-staining to steel surfaces
  • No harmful ingredients
  • Excellent pumpability
  • Perfect for centralized lubrication systems.
  • Low temperature torque -40 C
  • Extreme pressure/anti-wear features
  • Excellent resistance to oil separation
Tropix EP2© SDS HERE Download Printable PDF Version

You will need Acrobat Reader to view PDF. If you do not have Acrobat Reader. You can get it here.

For more information or a brochure please click here to contact Day Distributing.
----- back to top -----
  

USES – PLEASE READ APPLICATION RATES BEFORE USING IF YOU NEED ANY INFO. ON USES PLEASE CALL

RYCON – 1 OIL FORTIFIER

ENGINES -DIESEL, GASOLINE DO NOT MIX WITH 2 CYCLE OIL!!

TRANSMISSIONS – AUTOMATIC, MANUAL, CONE CLUTCH SYNCRO UNITS, POWER SHIFT HYDRAULICS, HYDROSTATIC TRANSMISSIONS, TDH OILS.

GEAR DRIVES, TRANSFER CASES, GEAR REDUCERS, FINAL DRIVES, TURBINES, HYDRAULICS, RECIRCULATING SYSTEMS ( Do Not Use in POSITRAC OR LIMITED SLIP DIFFERENTIALS)

CUTTING OILS, POWER STEERING FLUID, SPOOL DIFFERENTIALS, DRILLING & TAPPING OILS, CHAIN SAW BAR OILS, COMPRESSORS, METAL STAMPING, AUTOMATIC OILERS,

TURBOS (reduces lag), SUPERCHARGERS, OIL HUBS. GREAT FOR STORAGE, RYCON WILL KEEP YOUR ENGINES , SEALS & GASKETS PROTECTED


TRIJET FUEL TREATMENT

For GASOLINE & ALL DIESEL ENGINES, 2 CYCLE ENGINE ALSO ULTRA LOW SULPHUR DIESEL > ALL IN ONE FUEL TREATMENT PLEASE MIX TRIJET WITH FUEL FOR 2 CYCLE ENGINES!-- DO NOT MIX WITH 2 CYCLE OIL!.

CARS, TRUCKS, GO CARTS, ATV’S, CHAIN SAWS, WEED EATERS, LAWN MOWERS, BOATS, STATIONARY DIESEL ENGINES,


TROPIX # 2 GREASE

WHEEL BEARINGS, CONSTANT VELOCITY JOINTS, UNIVERSAL JOINTS, FIFTH WHEELS, KING PINS, BALL JOINTS, CHASSIS POINTS, COUPLINGS, DRAG LINKS, SLACK ADJUSTERS, CAMS, MILLING HEADS, EXPOSED GEARS, ROCK CRUSHERS, CONVEYORS, DRILLING MACHINERY, HIGH SPEED SPINDLES, SHEARS, BLOWERS, OSCILLATORS, ROLLER BEARINGS, WIND TURBINES.


WILL CREEP AND MOVE OVER METAL SURFACES. SAVE TIME, SAVE PARTS, SAVE MONEY!